Creality ABS (Acrylonitrile Butadiene Styrene) is a high-strength engineering 3D printer filament designed for functional prototypes, mechanical parts, and structural components that require toughness and wear resistance.
Key Characteristics & Specifications
• Material Type: Petroleum-derived thermoplastic (Acrylonitrile Butadiene Styrene)
• Diameter: 1.75 mm (with tight consistency/tolerance around ±0.03 mm)
• Spool Weight: Typically 1 kg
• Tensile Strength: ~30.4 MPa to 43 MPa (depending on the specific standard or Hyper series variant)
• Impact Strength (Charpy): ~19 kJ/m²
• Heat Resistance / Thermal Endurance: Withstands higher temperatures than PLA (up to roughly 76°C–100°C)
• Post-Processing: Compatible with acetone smoothing, sanding, and painting
Recommended Print Settings
• Nozzle Temperature: 220°C – 270°C (standard ABS around 220–260°C, Hyper ABS up to 270°C)
• Heated Bed Temperature: 80°C – 120°C
• Print Speed: 30–60 mm/s for standard setups, or up to 350 mm/s on high-speed enclosed printers like the Creality K1 Series
• Chamber / Environment: Requires an enclosed printer and good ventilation due to styrene and VOC emissions during printing
• Bed Preparation: PEI sheet, textured plate, or adhesive aids like ABS slurry, hairspray, or Magigoo








